TECHNOPOOL3 GUARANTEE CERTIFICATE
Dosing systems for swimming pools ENGLISH
ADSP7000716 rev. 1.0 25/01/2017 21/64
7 Winter pause
It is recommended to work the system with tap water to clean the tube and avoid chemical attacks during the pause
period. Probes must be removed from the installation, during the winter pause. The protective cap must be filled
with 1/3 of water and placed on the probe edge.
8 Operations to carry out at the beginning of the season
It is recommended to install a new probe at the beginning of the season, to prevent the system from
malfunctions.
Once replaced the electrode or when restarting the system, repeat the calibration procedure.
9 Return to the after-sales service
The material must be sent back in its packaging with all its original protection devices before the guarantee period
is completed.
The system must be clean and the chemical product removed from the tubes.
The measure electrode must be placed in its original packaging and protected with the cap full of water.
The manufacturer declines any responsibility regarding damages caused by transportation, if the aforementioned
conditions are not respected.
10 Guarantee certificate
The manufacturer guarantees the material for a period of 24 months from the date of delivery to the first buyer.
During this period of time, after an examination of the manufacturer or an authorised reseller, the manufacturer will
provide free of charge any failed component which material or processing is found defective or, at its option, the
component will be repaired directly or through authorised workshops.
All components subjected to normal wear are excluded from the guarantee, such as: tubes, valves, gaskets,
connections, tube ring-nuts, filters, injection valves, probes, electrodes and glass components.
The manufacturer declines any responsibility and obligation regarding other costs, damages and direct or indirect
losses arising from the use or inability to use the pump, in whole or in part.
Repair and replacement shall not extend or renew the guarantee period. Assembly and dismantling costs of the
system pumps, transportation costs and used materials (filters, valves, etc.) are borne by the buyer.
The right to repair or replace under guarantee becomes void when:
The pump is not used according to installation, use and maintenance instructions provided by the
manufacturer.
The pump is repaired, dismantled or modified by non-authorised workshops.
Non-original spare parts or accessories have been used.
The injection system is damaged after using incompatible products.
The electric system is damaged for external causes of any type, for example overvoltages.
At the end of the 24th month from the date of delivery, the manufacturer will be released from all the above
mentioned obligations.
Pursuant to directives 2011/65/UE , 2002/96/EC, 2003/108/EC), it is notified that:
The electric and electronic devices must not be considered as household waste.
Consumers are obliged by law to return electrical and electronic devices at the end of their service lives to the public collecting
points set up for the purpose or point of sale, when purchasing a new equivalent device in terms of one-to-one. The crossed out
rubbish mean symbol on the product, on the instructions manual or on the packaging indicates that the product is subject to the
disposal rules envisioned by the Standard. Illegal disposal of the product implies the application of the administrative fines
provided for by national regulations. By recycling, reusing the material or other forms of utilising old devices, you are making an
important contribution to protecting our environment.
To Next Page
Loading...