Mega Technopool pH-Rx - Appendix: Default Parameters

TECHNOPOOL3 APPENDIX 2
Dosing systems for swimming pools ENGLISH
ADSP7000716 rev. 1.0 25/01/2017 22/64
11 APPENDIX 1 – Default parameters
Parameter
Default value
Language
English
Set Point pH
7,4
pH Work Mode
Acid
Proportional Band pH
1
Set Point Rx
650 mV
Proportional Band Rx
50 mV
Relay Mode
Cyclical
Relay On
0 s
Relay On at the maximum temperature
0 s
Relay Off
0 s
Relay Off at the maximum temperature
0 s
Maximum Temperature for Relay Timing
28 ˚C
Stabilisation Time
30 s
Stabilisation after Alarm
No
Password
“0000”
User name
“ “
Contact assist.
“ +390522695805 “
Out 24V Alarm (alarm repetition)
Closed with Alarm
Temperature Mode
PT100
Manual Temperature
25 ˚C
Offset PT100
0 ˚C
Dosing Control (V1)
On
Flow Control
Off
pH dosing Alarm
Off
Rx dosing Alarm
Off
Buzzer (alarm repetition)
Off
System kind
Technopool TpH
Pump pH flow
1.4 l/h
Pump Rx flow
1.4 l/h
Pump pH Max flow
4.0 l/h
Pump Rx Max flow
4.0 l/h
pH Cycle Period
5 min
Contrast
25