Mega Technopool pH-Rx - Product Conformity; Technical Specifications; Electrical Specifications; Package Contents

TECHNOPOOL3 INTRODUCTION
Dosing systems for swimming pools ENGLISH
ADSP7000716 rev. 1.0 25/01/2017 4/64
1.2 Conformity
Our pumps are manufactured according to General Standards in force and in compliance with the following
European Directives:
 n° 2014/30/CE “ e s.m.i.
 n° 2014/35/CE “DBT Low Voltage Directive” e s.m.i.
 n° 2011/65/UE , 2012/19/UE “direttive RoHs e WEEE” e s.m.i.
To achieve the best and ensure the longest durability of the system, read and follow the rest of the manual
especially the part relative to maintenance.
The manufacturer declines any responsibility for damages on the system caused by non-qualified
personnel.
1.3 Technical features
 Back-lit LCD display 2x16.
 Red LED (pH) pH alarm signal.
 Red LED (Rx) redox alarm signal.
 Main ON/OFF switch.
 Dose enable switch for each pump.
 Solenoid valve output (dry contact, no voltage).
 Flow sensor input.
 Due inputs for level probes.
 An input for temperature probe PT 100.
 A BNC input for pH electrode.
 A BNC input for redox electrode.
 Alarm repetition output 24VDC.
Hereunder are the maximum pump capacities:
 4 L/h @ 1 bar, Santoprene® tube.  1 L/h @ 3 bar, Silicone tub
1.4 Electrical features
 Power supply: 100÷240 VAC 50/60 Hz and consumption (max): 14 W.
 pH Range: 0.00…14.00.
 Redox Range: 0…1000 mV.
 Temperatura range (PT100): 0…100° C.
1.5 Packaging content
 Technopool pH-Rx System.
 Instruction manual.
 Wall mounting bracket.
 Screws and wall plugs for wall fixing.
 pH 4 buffer solution.
 pH 7 buffer solution.
 475mV buffer solution.
 pH electrode with 5 m cable.
 Redox electrode with 5 m cable.
 3-wire temperature probe PT100 with 5 m cable.
 DN50 collars (3 pcs).
 Suction filter (2 pcs).
 Injection valve (2 pcs).
 Probe holder (2 pcs).
 Suction and delivery tubes.
