38
13. SETUP Configuration options
Operator SETUP allows the MIT to be customised to suit application or operator preferences.
To enter SETUP, select the spanner with the rotary knob. The following options are available:
13.1 SETUP navigation
1. Press the TEST button to scroll through the SETUP options.
2. When the display shows the required SETUP option, press the UP or DOWN arrows to change the value for that option.
The LOCK symbol will flash to indicate the value has been changed from the saved setting.
3. Press the LOCK button to store the new value
4. When all SETUP functions have been configured to the desired values, turn the rotary knob away from the SETUP setting.
Display message Function Options Factory setting
bu2 Buzzer threshold
< Limit = buzz
1, 2, 3, 4, 5, 10, 20, 30, 40, 50, 100, 200
2 W
Loc Insulation Lock enable/disable On = INS lock enabled
OFF = INS lock disabled
On
ISc Continuity short circuit current
200 mA = (up to 10 W)
20 mA
200 mA
InS Insulation limit alarm threshold BM50/4, MIT410TC/3, MIT405/2, MIT415/2,
MIT417/2:
0.5 MW
0.5, 10, 20, 50, 100, 200, 500, 1000 MW
MIT400/2, MIT410/2, MIT420/2, MIT430/2,
MIT481/2, MIT485/2, MIT2500: 0.5, 1, 2, 3, 4,
5, 10, 20, 30, 40, 50, 100, 200, 300, 400, 500,
1000 MW
SEtV Variable insulation test voltage MIT485/2 :- 50 V - 500 V 10 V
MIT420/2 and MIT430/2 :- 50 V - 1000 V 10 V
MIT2500 :- 50 V - 2500 V 100 V
t INS count down timer 1,2,3,4,5,6,7,8,9,10 minutes 1 min.
CAb Cable capacitance / km / miles 40 to 60 nF/km 50 nF/km
80.5 nF/mile
bLt Backlight timer 20, 60, OFF (OFF = no auto off) 20 secs
SLt Sleep timer 10, 20, 30, 60, OFF (OFF = no auto off) 10 mins
HuF REN (Telephone handset)
calculator
0.5, 0.6, 0.7, 0.8, 0.9, 1.0,1.1, 1.2, 1.3uF 1.0 uF
tLu Terminal Lockout voltage 25, 30, 50, 75 50 volts
REV Auto reversal of continuity On/OFF OFF
ESd Enable the 104, 105, 106 etc
display range
MIT400ESD:- On/OFF OFF
bAt Battery voltage 1.2 V / 1.5 V (All Models) 1.5 V
RSt Restore factory settings Restore No
LAng Display of either Tip-Ground-Ring
or A-E-B LCD symbology
US, EU US
dis Distance by uF m, ft m