7
1. Instrument Layout
1.1 Overview of the PAT400
1.2 Instrument layout
The PAT400 series of portable appliance testers are fully automated testers for the fast safety testing of portable electrical equipment.
The PAT400s will operate from 230 Vac or, for UK variants 230Vac and 110 Vac supplies.
All warnings must be read and understood before the tester is used.
All operators should also be competent in the safety testing of electrical equipment and meet all the local legal requirements before
testing.
9 V PP3 rechargeable NiMH Battery is supplied - not fitted. This should be installed prior to first use. See section 1.8 for instructions.
Qwerty keypad
Escape button
Home button
Power OFF
USB interfaces
Lead null post
Bond/continuity
socket
Flash test socket
110 V test socket (UK Only) IEC/Extension lead return test socket Mains test socket
Fuse checker
HOT KEYS
QVGA Colour
display
Up/Down/Left/Right
navigation keys
OK button
TEST button
Quick test access
button
To Next Page
Loading...
