10 Settings
48
Connection via TCP
ü
A suitable documentation software e.g. MELAtrace is installed.
1. SelectConnection via TCP. The TCP port
currently set is displayed on the lower pushbutton
(Standard TCP port: 65001).
2. Press on this pushbutton to change the pre-set TCP
port. The display switches to the settings window.
3. Delete the most up-to-date TCP port using button
C; enter another TCP port.
4. Confirm with SAVE.
IP addresses
PLEASE NOTE
Those setting up the (practice) network will require in-depth understanding of the
network technology.
Errors in the handling of IP addresses can result in malfunctions and data loss in your
practice network.
n IP addresses may only be set by the (practice) network system administrator.
The device is equipped as standard with IP addresses which all belong to a common network with the sub-
net mask stated in the following depiction.
Device IP address Remarks
Steam sterilizer 192.168.40.40 Preset works side
Computer 192.168.40.140 Preset works side
MELAprint 42/44 log printer 192.168.40.240 Preset works side
MELAprint 60 label printer 192.168.40.160 Preset works side
Gateway 192.168.40.244 Not relevant within a network
Subnet mask 255.255.255.0 Possibly to be adopted by customer
network
To Next Page
Loading...
