33 of 289
Specications
For indoor use only
Type/# of Heads Upper Arm-Lower Arm/1 to 6 Modular
# Needles 16
Maximum Tubular Frame Size (XxY) 500mm x 430mm (19.7”x 16.9”)
Maximum Sew Field/Tubular Frame (XxY) 410mm x 350mm (16.1”x13.7”)
WA Cap Frame 362mm x 82mm (14.1” x 3.25”)
Conventional Cap Frame 152mm x 70mm (5.9”x 2.75”)
Min/Max Sew Speed Flats 300-1400 spm
Min/Max Sew Speed Caps 300-1200 spm
Stitch Length Range Only Limited by Hoop Size
User Interface Melco OS
Machine Conguration Up to 6 individual machines, connected by
Ethernet
Self-Diagnostics Capability Retrieves relevant machine data for
troubleshooting
Simplied User Interface Step by Step Guide Software
Design Memory Limited only by hard drive, Max le size 500k
Pre-Sew Trace Laser
Needle to Garment, Garment to Hoop Position Laser Positioning System
Thread Feed Technology Patented Acti-Feed
Thread Break Detection Upper & Lower Electronic Force Gauge Sensor
Automatic Stitch Backup Yes
Automatic Trimmer Yes
Lighting Type Cold Bright Cold bright LED
Power Supply (V) 90-260V (Single Phase, 50/60 HZ, 4A), Class I
(Grounded)
Power Consumption (W) 120V AC / 240V AC (480 Watts)
Temperature Range 15-40° C
Humidity Max 85% Relative Humidity
Installation Category (overvoltage) II
Pollution Degree 2
Motor Type(s) Servo, Stepping
Motor Capacity (kV) X and Z: 100 Watts Y: 250 Watts
Machine Construction Material Aluminum
Physical Specications with Cart
Width 724mm (28.5”)
To Next Page
Loading...
