Operation and Control
34 D30374 11/2023
See also
2 Acoustic Signals [}46]
6.7 Graph
i
The GRAPH display provides an overview of the chronological sequence of the set values
and the actual values as a curve.
■ Press the activation key again to close the graphic display.
6.7.1 Temperature Curve
1. Press the activation key to the right of the GRAPH display.
ð The display is enlarged and the temperature curve is displayed.
2. To change the time range to display press the activation key next to the arrow
symbols.
ð The time range to display can now be displaced by turning the turn control.
To zoom in or out in the graph:
3. Press the activation key next to the magnifying glass symbol.
4. With the turn control, select if you want to zoom in or out (+/–).
5. and confirm your selection by pressing the confirmation key.
ð To close the graphic display, press the activation key again.
6.8 Ending Operation
1. Switch off the active unit functions (reset setpoint values).
2. Remove the chamber load.
3. Switch off the unit at the main switch.
To Next Page
Loading...
