Mercury Sterndrive QSD 2.0 - Page 59

Section 5 - Maintenance
90-8M0069751 eng APRIL 2012 Page 51
12. Remove and discard the old filter element. Discard the old cover O‑ring.
Engine coolant oil cooler Seawater oil cooler
a - Oil filter cover
b - O‑ring
c - Filter element
13. Apply sealant to the threads of the oil filter housing drain plug and install.
Engine coolant oil cooler
Seawater oil cooler
a - Oil filter housing
b - Drain plug
Tube Ref No. Description Where Used Part No.
9
Loctite 567 PST Pipe
Sealant
Drain plug 92-809822
14. Tighten the oil filter housing drain plug to specification.
Engine Coolant Oil Cooler
Description Nm lb–in. lb–ft
Drain plug 19 168 –
Seawater Oil Cooler
Description Nm lb–in. lb–ft
Drain plug 19 168 –
15. Lubricate and install a new cover O‑ring.
a
b
c
a
a
33986
a
33987
b
a
b