EasyManua.ls Logo

Merrychef conneX 12e - Process for Discharging the Capacitors

Merrychef conneX 12e
110 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2 For your safety
Back to contents >
Merrychef conneX
®
service and repair manual
21
Microwave emissions.
WARNING
Risk of burns from microwave emissions
Do not become exposed to emissions from the microwave generator or parts conducting microwave energy.
Never operate an appliance that has failed the "Microwave leakage test".
Fire / smoke in the appliance.
WARNING
Risk of fire and smoke
Flames and/or smoke may come out of the oven when switching it on after service/repair. This can be caused by a defective
electrical component or electrical connections (wiring) that have been refitted incorrectly.
Switch off the oven.
Disconnect/isolate the oven from the electrical supply.
Keep the oven door closed to stifle any flames.
2.14 Process for discharging the capacitors.
Tools required. (LOTO) lock off kit.
An approved capacitor discharge tool like the Merrychef recommended tool P/N 30Z5027
Approved electrical class 1 insulted gloves rated to a minimum of 5000 Volts.
Approved voltage tester and voltage proving device.
For detailed instructions go to the below website.
https://www.merrycheftechnical.com

Table of Contents

Related product manuals