METREL MI 3125 User Manual

MI 3125 InstaltestCOMBO Instrument set and accessories
18
3.5 Instrument set and accessories
3.5.1 Standard set MI 3125
 Instrument
 Short instruction manual
 Calibration Certificate
 Mains measuring cable
 Test lead 3 x1.5 m
 3x test probe
 3x crocodile clip
 Set of NiMH battery cells
 Power supply adapter
 CD with instruction manual, and “Guide for testing and verification of low
voltage installations” handbook.
 Soft hand strap
 RS232/PS2 cable
3.5.2 Optional accessories
See the attached sheet for a list of optional accessories that are available on request
from your distributor.

METREL MI 3125 Specifications

General

Type	Multifunction Installation Tester
Insulation Resistance	Yes
Continuity Test	Yes
Loop Impedance	Yes
RCD Testing	Yes
Voltage Measurement	Yes
Frequency Measurement	Yes
Display	LCD
Power Supply	6 x 1.5 V AA batteries
Loop Resistance Resolution	0.01 Ω
Frequency	45 - 65 Hz
Line Voltage Resolution	1 V
Insulation Resistance Test Voltage	50 V, 100 V, 250 V, 500 V, 1000 V
Insulation Resistance Resolution	0.01 MΩ
Continuity Resistance Resolution	0.01 Ω
Test Current	200 mA
DC Voltage	Up to 600 V
Loop Resistance	0.0 Ω - 1999 Ω
Line Voltage	Up to 550 V
Line Voltage Accuracy	±2% ±2 digits
Rated Residual Current	10 mA, 30 mA, 100 mA, 300 mA, 500 mA
Insulation Resistance Range	0.01 MΩ to 1 TΩ
Continuity Resistance	0.0 Ω - 1999 Ω
Dimensions	220 x 103 x 55 mm
Operating Temperature	-10°C to 50°C
Storage Temperature	-20°C to +60°C
Safety Standards	EN 61557
Loop Resistance Accuracy	±(5% + 3 digits)