MI 3125 EurotestCOMBO Appendix B
58
B Appendix B - Accessories for specific
measurements
The table below presents standard and optional accessories required for specific
measurement. The accessories marked as optional may also be standard ones in some
sets. Please see attached list of standard accessories for your set or contact your
distributor for further information.
Function Suitable accessories (Optional with ordering code A….)
Insulation resistance Universal test cable
Tip commander (A 1270)
R LOWΩ resistance Universal test cable
Tip commander (A 1270)
Probe test lead 4m (A 1012)
Socket test Universal test cable
Plug commander (A 1272)
Resistance box (A 1195)
Voltage, frequency Universal test cable
Tip commander (A 1270)
Line impedance Universal test cable
Plug commander (A 1272)
Mains measuring cable
Tip commander (A 1270)
Three-phase adapter (A 1111)
Fault loop impedance Universal test cable
Plug commander (A 1272)
Mains measuring cable
Tip commander (A 1270)
Three-phase adapter (A 1111)
RCD testing Universal test cable
Plug commander (A 1272)
Mains measuring cable
Three-phase adapter (A 1111)
Phase sequence Universal test cable
Three-phase cable (A 1110)
Three-phase adapter (A 1111)
Voltage, frequency Universal test cable
Plug commander (A 1272)
Mains measuring cable
Tip commander (A 1272)
To Next Page
Loading...
