138
19. Cal.code .... 00000
Entry of calibration code. Calibration code is a five-digit number, which must be entered to access the
calibration mode. If the calibration code is set to “00000”, this information is displayed in the Setup menu.
Calibration code can be changed. New calibration code can be directly entered using numeric keyboard and
confirmed by pressing ENTER. If non-zero calibration code is set, correct calibration code must be entered to
access the calibration mode. Non-zero calibration code is not displayed further on the display.
The purpose of the calibration code is to prevent unauthorized users from changing the calibration of the
instrument.
Note
It is advisable to write down actual calibration code if changed. If you forget the calibration code, you have to
send the calibrator to the manufacturer.
20. Cal.date .... xx.yyyy
Displays the date of last calibration of the calibrator (month/year).
21. Serial No .... xxxxxx
22. Time .... xx:yy
23. Date .... xx.yy.zzzz
24. Time on display .... xx ON/OFF
To Next Page
Loading...
Need help?
General
