MG 40 Series - Component Identification

840DCT EM-9538-B Rev.5
MG CO., LTD. www.mgco.jp
5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN
1.4 COMPONENT IDENTIFICATION
■ FRONT VIEW
• With Front Panel
NOTE
• The engineering unit sticker label position is our recommended position.
• When an engineering unit is specied by the Ordering Information Sheet, the unit(s) will be shipped with the sticker
label put on the above position.
• Without Front Panel
COMPONENT FUNCTION COMPONENT FUNCTION
Polarity indicator Turns on when negative value is displayed. 4-digit display Indicates present value, setting value and
scaling error. Range: 0 to 9999
BUTTON FUNCTION
D
ISP/↓
Used to move on to the display setting mode, to shift through setting items in
each setting mode, or shift through display digits in each setting item.
S
CALE/↑
Used to move on to the scaling setting mode, to shift through setting items in
each setting mode, or shift through display digits in each setting item.
S
HIFT Used to move on to the setting standby status.
U
P Used to change setting values in a setting standby mode.
Engineering unit
sticker label position
Front panel