MG GT - Maintenance

EmergencyInformation
T urningthejackscrewhandlebyhand,adjustthejackuntil
thejackheadtssnuglyontotheangingofthebody.
Ensurethatthebaseofthejackisinfullcontactwiththe
levelground.
FittingtheSpareWheel
Checkthepressureofthesparewheelto
avoidattyreasitisnotusedforalongtime.
Alwayschecktyrepressuresafterchanginga
wheel.
Thewheelboltsmustbetightenedtothe
speciedtorqueafterchangingawheel
(120
～ ～
～
130Nm).
1Beforeraisingthecar ,usethevehicletooltoremove
eachwheelboltcap.Usethewheelboltspannerto
slackeneachbolthalfaturnanti-clockwise.
2T urnthejackhandleinaclockwisedirectionwiththe
wheelboltwrench(asshowninthegureabove),
soastoraisethevehicleuntilthetyreisclearof
theground.
3Removethewheelboltsandplacetheminthetool
kittopreventthemfrombeinglost.Makesure
thevehicleissteadyandthereisnoriskofslipor
movementbeforeremovingwheelbolts.
4Removethewheels.
Note:Avoidplacingwheelsfacedownonthe
ground-thesurfacemaybescratched.
5Fitthesparewheelandtightenthewheelboltsuntil
thewheelisseatedrmlyagainstthehub.
6Lowerthevehicleandremovethejack,thenFULLY
tightenthewheelboltsinadiagonalsequence.
7Finally,stowthetoolsbackintothetoolkitandput
thereplacedwheelatappropriatepositioninthe
boot(withthewheelrimfacingup).
Note:DONOTstandonthehandleofthewheelbolt
spanneroruseextensiontubeonthehandleofthe
spanner.
Note:Whenreplacingthewheel,pleasefullytighten
theboltsinthediagonalsequencetwice.
213
5