MG TF Series - 18 G330. Cylinder Head Nut Spanner; 18 G327. Gudgeon Pin Clamp Screw Spanner; 8 G351. Front Camshaft Bearing Reamer; 18 G314. Steering Gearbox Pinion Tail Bearing Reamer

oSPECIAL TOOLS ----------------
18G33O
18G327
18G351
18G33O. Cylinder Head Nut Spanner
A strong socket spanner with a tommy bar designed
to give the recommended maxImum torque to the
cylinder head stud nuts wIth normal hand pressure.
18G327. Gudgeon Pin Clamp Screw Spanner
Owing to the restricted space Inside the pistons 01
most engines, an ordinary box spanner is unsuitable
for removing or replacing the gudgeon pin damp screw.
This spanner is specially shaped to suit most models
of
the new Wolseley and Morris ranges. and Is long
enough to clear the connecting rod blg-end,
8G351. Front Camshaft Bearing Reamer
18G314
18G314. Steering Gearbox Pinion Tail Bearing
Reamer
This reamer is essential to ensure the correct
alignment of steering pinion bearings as explained In
Section
J.
Q.6
ISG329
18G329. Oil Pump Bush Reamer
This reamer has been designed to ream the oil
pump bushes of the M.G. Midget (Series TO) in line.
Its use is straightforward.
M,G. Midget, Issue 2 11294-10/51
Wishvilles Classic
Automobile Library