MGL Avionics V6 - Specifications; General Specifications; Physical Specifications; Transmitter Specifications

Specifications – Subject to change without notification
General
Frequency range RX: 108.000-136.975MHz
Frequency range TX: 118.000-136.975MHz
Frequency control: High resolution fully digital PLL (DPLL) with
precision reference oscillator and
CORTEX M3 micro-controller
Tuning steps: 1MHz, 25KHz or 8.33KHz
Display: Graphic LCD with green backlight – 36 x
20mm
Memories: 99 + 10 x 20 SL30/SL40 compatible
frequency lists
Physical
Configuration: Rear mount - standard Ø57mm / 2¼” cutout
Overall dimensions: W61mm x H61mm x D140mm
W2.3” x H2.3” x D5.5”
Installed depth: 120mm / 4.8” (excl. connectors and wiring)
Operating temperature range: -20ºC ... +55ºC
Weight: 250 grams
Transmitter
Configuration: LDMOS output stage with digital modulator
Output power TX: 6.5W ±10% at 13.8V (specified power
rating)
5W at 12V (typical)
3.5W at 10V (typical - low voltage operation)
Frequency tolerance: <5ppm (-20ºC ... +55ºC)
Modulation: AM (6K00A3E)
Spurious output: < -60 dBc
PTT timeout 35 secs (may be restarted)
Receiver
Configuration: Double conversion super heterodyne
1
st
IF 45MHz 2
nd
IF 455KHz
Sensitivity: < 2uV (-101dBm / 50Ω) for 6dB S+N/N
(m=30% 1KHz)
Spurious response: >10mV (-27dBm / 50Ω) – AGC method
Audio output power: >0.5W into 8
Ω, 600Ω compatible (up to 8
headsets)