EasyManua.ls Logo

MGL Avionics V6 - Receiver and System Specifications; Receiver Specifications; Other Specifications; Power Specifications

MGL Avionics V6
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Other
Microphone: Electret
Microphone bias: 8.2V low noise / 1K load
Audio subsystem: Digital with 24bit CODEC, 12KS/s, and DSP
Intercom: Four circuit with adjustable ambient noise
suppression
a) MGL Avionics propriety digital VOGAD
b) Conventional VOX
Music & Auxiliary Inputs: 2Vp-p (max) / 5K load
Serial communications: 2 x RS232, Garmin SL30/SL40 compatible,
MGL EFIS compatible, full remote
control
Power
Voltage: Nominal 13.8VDC Negative ground
Voltage limits: 10.0 ... 32.0VDC (continuous operation, no
damage)
Current RX: <250mA / 13.8VDC (no signal, squelch
closed)
Current TX: <1.5A / 13.8VDC (50 load)
RF Exposure
This Transceiver generates RF electromagnetic energy while transmitting. For
compliance with RF exposure limits, the antenna gain should not exceed
0dBd (dipole antenna) and any persons should maintain a distance of at least
0.75m/2.5' during operation.
Do not operate this Transceiver in an explosive atmosphere
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the condition that this device does not cause harmful interference,
This Transceiver has been tested for compliance with CFR 47 parts 2, 15,
and 87 as applicable and is registered accordingly. Any changes or
modifications not expressly approved may void the user's authority to operate
the equipment.
FCC ID: WSJV6 IC No:
27

Other manuals for MGL Avionics V6

Related product manuals