Optidew User’s Manual
viii 97551 Issue 1, February 2018
Safety
The instrument is designed to be completely safe when installed and operated correctly in
accordance with the information provided in this manual.
This manual contains all the required information to install, operate and maintain this product.
Prior to installation and use of this product, this entire manual should be read and understood.
Installation and operation of this product should be carried out by suitably competent personnel
only. The installation and operation of this product must be in accordance with the instructions
provided and according to the terms of any associated safety certificates. Incorrect installation
and use of this product other than those described in this manual and other than its intended
purpose will render all warranties void.
This product meets the essential protection requirements of the relevant EU directives. Further
details of applied directives may be found in the product specification.
Electricity and pressurized gas can be dangerous. This product must be installed and operated
only by suitable trained personnel.
No user serviceable parts inside
Warnings
Where this hazard warning symbol appears in the following sections,
it is used to indicate areas where potentially hazardous operations
need to be carried out and where particular attention to personal and
personnel safety must be observed.
Where this symbol appears in the following sections it is used to
indicate areas of potential risk of electric shock.
Electrical Safety
Ensure electrical safety is complied with by following the directions provided here and observing
all local operation & installation requirements at the intended location of use.
This product is completely safe when using any options and accessories supplied by the manufacturer
of this product for use with it. Refer to Section 2 (Installation) of this manual for further details.
Pressure Safety
For this product to operate satisfactorily, pressurized gas must be connected to it. Observe all the
information contained within this manual and all local operation & installation requirements at the
intended location of use. Refer to Section 2 (Installation) of this manual for further details.
To Next Page
Loading...
Need help?
General
