2
Issue 1.0 January 2018
Connecting a device
Physical connection
In order for the application to communicate with an instrument, it must be connected to the
computer. This connection can be made via a serial, USB or Ethernet connection.
Select the Instrument
Choose (click to highlight) your instrument from the list on the left.
NOTE: Modbus TCP controls will only enable if the instrument supports it.
USB / Serial Connections
To connect to Instruments fitted with USB or direct serial (RS-232 / RS-485), select the
communications port number from the com. port drop-down box.
To Next Page
Loading...
Need help?
General
