Optidew User’s Manual
Michell Instruments ix
Hazardous Materials (WEEE, RoHS2 & REACH)
This product does not contain or release any prohibited chemicals listed on the SVHC (Substances of Very
High Concern) Candidate List. During the intended normal operation of this product it is not possible for
the user to come into contact with any hazardous materials. This product is designed to be recyclable
except where indicated, see relevant sections in this manual for further details.
Calibration (Factory Validation)
Prior to shipment, the instrument undergoes stringent factory calibration that is traceable to national
standards. Due to the inherent stability of the instrument, regular factory calibration is not required,
however recalibration is recommended to maintain measurement traceability.
Michell Instruments can provide a fully traceable factory calibration service for the instrument and it
is recommended that this is considered at intervals of every year of the analyzer's life. Please contact
your local Michell Instruments' office or representative for further details (www.michell.com).
Repair and Maintenance
Apart from user-replaceable components required for routine operational maintenance described
above, the instrument must only be maintained either by the manufacturer or an accredited service
agent. Refer to www.michell.com for details of Michell Instruments’ worldwide offices contact
information.
To Next Page
Loading...
Need help?
General
