Micom 3f - Setting Radio Options; To Enter the Radio Options Mode

MICOM-3F/3T/3R HF-SSB Owner’s Guide
86
Setting Radio Options
➤ To enter the Radio Options mode:
1. Enter the Radio Programming menu (page 79).
MICOM-3
RADIO
PROGRAMMING
CHAN
PRMT
OPTS
2. Press OPTS (F3).
MICOM-3
RADIO
OPTIONS
AMP
TUNE
ALE
The OPTS option in the Radio Programming menu provides the following options (see also Figure 6):
• AMP
Enables/disables operation with an external RF power amplifier.
• TUNE
Enables/disables operation with an external antenna tuner. If you are using an
external tuner, you must set this option to YES.
• ALE
Enables/disables the ALE functionality. When the ALE option is disabled, MICOM-3
can use the Scan Mode (see Using the Scan Mode on page 30).