Micom 3f - The Menu; To Display the Menu; To Exit the Menu and Return to the Previous Working Mode (E.g., CHAN or FREQ)

MICOM-3F/3T/3R HF-SSB Owner’s Guide
14
The Menu
The menu is used to select what you want your radio to do.
➤ To display the menu:
1. Press MENU to display the first part of the Menu screen.
You can press the MENU key at any time during any sequence
of operations: that sequence is then discontinued and the
menu screen is immediately displayed.
MICOM-3
CHAN
FREQ
ALE
BIT
MENU
I
Note
When the ALE function is not used, the third item is
SCAN.
2. Press MORE to scroll to the second part of the Menu screen.
MICOM-3
LOCK
PROG
PSW
DIM
MENU
I
3. To select any item, press the function key next to it.
➤ To exit the menu and return to the previous working mode (e.g., CHAN or FREQ):
Press the ESC key. The deeper you are in the menu, the more times you need to press ESC.
Selecting the Display Language
1. Display the second part of the Menu screen as explained above.
MICOM-3
LOCK
PROG
PSW
DIM
MENU
I
2. Press PROG (F2) to enter the Programming mode.
MICOM-3
RAD
ALE
LANG
PROG
3. Press the function key next to the desired language.
4. Confirm the selection by pressing the ENTER key.
MICOM-3
LANG
ENGLISH
ENGL
FREN
ESPA
Notational Convention
In this manual, the following convention is used to simplify the description of the steps you need to
carry out actions using the keys and the LCD:
When a procedure begins with a sequence of steps, that sequence is represented in an
abbreviated format, with the > symbol indicating the next key to be pressed.
For instance, the following represents a sequence of steps that involves five key pressings:
MENU > MORE > PROG (F2) > RAD (F1) > CHAN (F1).