Micom 3f - Changing the Password

Basic Operating Instructions
33
Changing the Password
To be able to lock the radio, it is necessary to use a password. For security reasons, you may want to
change the password often. You enter a password and make changes in the Password mode.
➤ To enter the Password mode:
1. Press MENU to display the Menu screen.
MICOM-3
CHAN
FREQ
ALE
BIT
MENU
I
2. Press MORE to scroll to the second Menu screen.
MICOM-3
LOCK
PROG
PSW
DIM
MENU
I
3. Press PSW (F3).
MICOM-3
PSW
OLD:_
4. Enter the old password, using the keypad.
When you start to enter the password, you can use the
function keys to move the cursor to the left or right, or to
clear the display and enter the complete string .
MICOM-3
O.K
<--
CLR
PSW
OLD:******
Note
If you have not yet set a password, use the factory-defined password, 123456.
5. Press O.K. (F1) after you enter the old password.
If you enter the wrong password, MICOM-3 displays an error
message.
MICOM-3
PSW
WRONG PSW!
6. Enter the new password with the keypad.
7. Press O.K. (F1) to confirm the new password.
MICOM-3
PSW SAVED