Micom 3f - Programming the Vocoder

MICOM-3F/3T/3R HF-SSB Owner’s Guide
102
Programming the Vocoder
The PROG menu of the MICOM-3 provides access to the following functions:
• Programming the vocoder private (PVT) key.
• Display the vocoder hardware and software versions, and the vocoder configuration.
• Erasing the stored keys. You should erase the keys after their validity expires, or as a precaution
when the radio must be serviced.
➤ To access the vocoder programming menu:
1. Press MENU to display the Menu screen.
MICOM-3
CHAN
FREQ
ALE
BIT
MENU
I
2. Press MORE
to scroll to the second Menu screen.
MICOM-3
LOCK
PROG
PSW
DIM
MENU
I
3. Press PROG
(F2) to enter the Programming screen.
MICOM-3
RAD
ALE
LANG
VCD
PROG
4. Press VCD
(F4) to enter the Vocoder menu.
5. Press the relevant key to access the Vocoder options:
• PVT
(F1)
Select the key used in the private mode.
• CONF
(F2)
Display information on the vocoder hardware and software.
• ERAS
(F3)
Erase the stored keys.
Figure 9 shows the VCD programming options. The available selections are described in
the following sections.
Figure 9. VCD Programming Menu
MICOM-3
RAD
ALE
LANG
VCD
PROG
PVT
CONF
ERAS
1
8
.
.
.
.
.
.
.
.
.
.