Micom 3f - Operating Instructions

MICOM-3F/3T/3R HF-SSB Owner’s Guide
140
Wearing the Backpack Carrying Harness
To wear the backpack:
1. Put harness on your back by
inserting arms through shoulder
straps.
2. Tighten shoulder straps.
3. Buckle waist straps to belt and
adjust to size.
4. Adjust the breast strap length
and then attach the strap.
At this stage, the micomTrooper 3 is
ready for use as a backpack radio set.
Shoulder
Strap
Ad
j
ustment
Buckle
Bottom Flap
(Closed)
Shoulder
Straps
Breast
Strap
Protection Flap
(Closed)
Waist
Strap
Operating Instructions
Note
When using the micomTrooper 3 with its whip antenna, make sure to select YES
for the TUNER option (MENU>MORE>PROG>RAD>OPTS).
When using the micomTrooper 3 with a dipole or long wire antenna (static
operation as described on page 141), make sure to select NO for the TUNER
option.
1. Turn the micomTrooper 3 ON/OFF switch and volume control clockwise, and adjust for a
comfortable listening level.
2. You are now ready to start using the micomTrooper 3. For operating procedures, use the
information appearing in the previous Chapters.
3. To turn the micomTrooper 3 off, turn its ON/OFF switch and volume control fully
counterclockwise, beyond the detent position.