USER INSTRUCTION MANUAL
Page 22 of 49 ENGLISH
8.4 StimLab™ Optional Installation Accessories
The following optional Installation accessories are available from Micropace for the StimLab™ System.
Number
MP3096 (kit) StimLink™ Kit for
communication with EP
Recorder.
Opto-isolated outgoing RS232 communication channel
for connection with EP Recorder with corresponding
Software receiver.
MP3084-12
MP3084-25
Extension Serial RS232
Cable, (incl. RF
suppression) – 12m or 25m
Standard extension RS232 connection cable for
connection between SGU and PC.
MP3183 StimLab™ Mobile Stand Five wheeled variable adjustment stand for Remote
Touch Screen.
Table 4 List of available Installation Options for the StimLab™ Cardiac Stimulator System.
9
9
INSTALLATION
Refer to the Micropace EPS320 Family Technical Description for full installation instructions.
Installation is to be performed by Qualified personnel only, such as your Distributor or Authorized
Micropace representative.
To Next Page
Loading...