program, this is the default setting. This is also the default button on
scanners with the "Go" button feature.
Copy button
Point the cursor on the Scan To button, then click and hold the button for a
moment. Select Copy from the drop-down menu.
When the Print dialog box appears, select your default printer or any
alternative printer from the options, then specify the number of copies to be
made. When you are ready to print, click Print to create a copy of the
scanned material directly on your default printer.
The function of the Copy button is similar to the E-mail button.
E-mail button
ScanWizard 5 automatically attaches the scanned image to your E-mail
message.
Point the cursor on the "Scan to" button for a moment, then click and hold
the button. Select E-mail from the drop-down menu.
The Save As dialog box appears and prompts you to save the file to your
folder and key in a file name. It is recommended that you use either JPEG
or PICT as the file format.
Make sure that the check box "Send image(s) to application after saving"
has been selected/checked.
Make sure your preferred E-mail application is selected from the listed
options.
Click Save to launch your E-mail editor with the attached image, then start
typing your message and hit the Send button.
OCR button
Point the cursor on the Scan or Scan to button, then click and hold the
To Next Page
Loading...
Need help?
General
