The factory default setting is shown in bold.
Programme Status* Possible settings
P1 S0
S 1 Factory default settings reinstated
P 2 Demo mode S 0 Off, the appliance will heat up
S 1 On, the appliance will not heat up
P 3 Buzzer tone S 1 Very quiet
S 2 Quiet
S 3 Medium
S 4 Loud
P 4 Water hardness
Hardness
range
Degree of
hardness
mmol/h
S 1 Soft < 8.4 °dH < 1,5
S 2 Medium 8.4 –14 °dH 1,5–1,5
S3 - - -
S 4 Hard >14 °dH > 2,5
P 5 Temperature unit S1 °C
S2 °F
P 6 Pre-heating S 0 Pre-heating not active
S 1 Pre-heating active
P 7 Keypad tones S 0 Off
S1 On
Water hardness
Your local water supplier will be able to advise you on the water hardness in your
area.
Settings
72
To Next Page
Loading...
