An audible tone will sound and the p symbol will start
flashing ten minutes before the end of the descaling process.
^
Remove the water container and empty it. Remove the
insert from the water container.
^
Rinse the water container and the insert thoroughly.
^
Replace the insert and fill the water container with 1 litre of
fresh tap water. Push the water container into the appliance
until it connects.
The flashing p symbol will go out and the k symbol will start
flashing.
^
Confirm with "OK".
The colon will start flashing and the k symbol will now light
up constantly. The descaling process will continue.
After descaling
An audible tone will sound when the descaling process has
been completed.
^ Switch off the appliance.
^ Remove the water container and empty it.
^ Dry the steam oven interior.
Leave the appliance door open until the oven interior is
completely dry.
Cleaning and care
80
To Next Page
Loading...
