Miele PLW 8616 - Additional Programs; Service Program

Application technology
38
Additional programs
Program Area of application Mobile
unit
Laboratory
Special
- Program for cleaning and thermal disinfection at 199°F (93°C)
and 10min holding time in the first program phase; wash wa-
ter is only pumped out after the disinfection process
- In 2power levels
A 503
Rinse cold wa-
ter
- Program for rinsing wash items with cold water, e.g., to re-
move:
- Heavy soiling
- Disinfectant residue
or
- To prevent soiling from drying and becoming encrusted on
wash items before the start of a reprocessing program
A 503
Rinse DI water - Program for rinsing wash items with DI water, e.g., to remove:
- Heavy soiling
- Disinfectant residue
or
- To prevent soiling from drying and becoming encrusted on
wash items before the start of a reprocessing program
A 503
Drying - Program for drying temperature-stable wash items
- Not suitable for heat-sensitive wash items
A 503
Service program
Program Area of application Mobile
unit
Tank emptying Program for emptying the tank, e.g., for long downtimes; the
wash cabinet must be empty
1)
Zero
Manual disin-
fection
Program to drain the wash cabinet when the wash water needs
to be decontaminated by adding disinfecting agent in the event
of a program cancellation (see “Operation, program cancella-
tion”)
A 503
1) Depending on the configuration of the Standby parameter in the web interface under
Water intake/DI water tank, the tank is automatically replenished at the end of the program
(see the programming manual, “System, appliance configuration, water intake”).