Miele PLW 8616 - Restarting; Opening the Data Plate Menu

System settings
70
Restarting
The Restartfunction shuts down the machine controls and then re-
boots them. This Restart can be used, for example, when you get the
prompt Switch machine off and on when you are troubleshooting.
 Press the Restartbutton.
The Restart?confirmation prompt is displayed. Press OK to restart or
to cancel the process.
For stable continuous operation, it is recommended to restart the
machine once every 24hours. The restart can be performed using
this function.
Alternatively, the machine restart can be performed in the web inter-
face automatically using the System/Machine configuration/Auto-
matic restart function or manually under System/Machine func-
tions/Restart the machine.
Opening the data plate Menu
The following information is listed in the Data platemenu:
- Machine type
- Machine name
- Commissioning date
- Fabrication number
- Fabrication index
- Machine type
- Material number
- Software version
In addition to the Machine nameparameter, an individual name can
be entered for the machine.
 Press the button next to the Machine nameparameter.
The on-screen keyboard is displayed for entering the machine name.
 Enter the name for the machine and press OK to confirm.
The assigned machine name is used:
- in the web interface
- in reprocessing reports
- in fault reports
- in data transferred to software for process documentation