Miele PLW 8616 - Filling the Dispensing System

Dispensing liquid process chemicals
46
 Insert the service cover into the lower brackets of the machine and
press on it.
 Lock the service cover.
 Acknowledge the message Fill container for dispensing system “x”
with the OK button.
Each time a container is filled or replaced, the Fill dispensing sys-
temfunction must be carried out to remove any air from the dis-
pensing system.
Filling the dis-
pensing system
A dispensing system must be filled when:
- The corresponding container has been filled or replaced with a new
one.
- The process chemicals have been changed.
A dispensing system can only be primed if there are no load carri-
ers in the wash cabinet.
 Open the Systemmenu.
 Open the Machine functionsoption.
 Open the Fill dispensing systemoption.
 Press the button for the corresponding dispensing system, e.g.,
DOS 1.
The dispensing system will be filled.