Miele PLW 8616 - Configuring the Printer

System settings
59
Configuring the
printer
A connected printer can be set up using the display or the web inter-
face. To set the printer up in the web interface, see the programming
manual.
 Press the Printerbutton.
 Press the button next to the Typeparameter.
The display shows a menu with the available printer options.
Please note:
 Activate the required printer with the button next to the model des-
ignation.
The bar in the button of the activated printer is displayed in white.
 Exit the menu by pressing the button.
You must enter the corresponding IP address of the selected network
printer.
 Press the button next to the IP Addressparameter.
The on-screen keyboard is displayed for entering the IP address.
 Enter the IP address and press OK to confirm.
The Direct printparameter determines whether a reprocessing report
is to be transferred to the connected printer and printed out immedi-
ately at the end of the program. In addition to being printed out di-
rectly, the wash report is also saved in the machine controls. You can
print out additional copies of a wash report using the Documenta-
tionbutton in the Main menu.
 Press the button next to the Direct printparameter to activate the
option to print out directly.
The bar in the button is displayed in white.