Operation
47
Switching the machine on and off
The I/0 power switch disconnects the machine from the power sup-
ply. It is located on the infeed side of the machine next to the display.
Press the I power switch to switch the machine on.
Once the boot process has finished, the machine is ready for opera-
tion.
Press the 0 power switch to switch the machine off.
The machine controls are shut down and the machine is discon-
nected from the power supply.
PLW 8616
There is a second 0 power switch for emergencies on the outfeed
side of the machine next to the display. It also disconnects the ma-
chine from the power supply. It is only possible to turn the machine
on again on the infeed side.
Loading the wash cabinet
The load carrier is pushed into the machine wash cabinet from the in-
feed side.
Press the button to open the door on the infeed side.
Push the load carrier from the transfer trolley into the machine wash
cabinet.
The markings on the load carrier and in the wash cabinet need
to be flush with one another.
Press the button to close the machine door.
To Next Page
Loading...
