Miele PLW 8616 - Selecting a Program; Selecting a Load Carrier

Operation
48
Selecting a program
The reprocessing programs are assigned to certain load carriers.
Therefore, a load carrier must be selected first with the help of a pic-
togram.
Selecting a load
carrier
 Press the Reprocessingbutton.
The menu for selecting the load carrier via a pictogram is displayed.
Select load carrier
A 503 A 503 + A 603
A 500 + A 613 A 505



US
BED
user/

If more than 4load carriers are available, you will be able to scroll
through several pages in the selection menu.
 Press the button for the required load carrier, e.g., A503.
The pictogram of the selected load carrier is displayed in the header,
e.g.,  Reprocessing.
The reprocessing programs which can be selected are listed.
 Press the button for the required reprocessing program.
The program start screen is displayed.