Miele PLW 8616 - Checking Mobile Units, Modules, and Inserts

Maintenance measures
79
Checking mobile units, modules, and inserts
Mobile units, modules, and inserts should be checked daily to make
sure they are functioning correctly. A checklist is supplied with the
machine.
The following points must be checked:
- Are the guide rails in good condition, and are they securely at-
tached to their mobile units?
- Are the lock nuts for the guide rails tightened securely?
- Are the locking caps in the module connectors of the modular sys-
tem mobile units working properly?
- Are all injector nozzles, irrigation sleeves, and hose adapters se-
curely attached to mobile units or inserts?
- Are all injector nozzles, irrigation sleeves, and hose adapters clear
so that wash water can flow through unhindered?
- Are all caps and fasteners securely attached to the irrigation
sleeves?
If spray arms are present:
- Do the spray arms rotate freely?
- Are the spray arm nozzles free from blockages (see “Maintenance”
– “Cleaning the spray arms”)?
- Are the magnets present at the end of the spray arms?
- Are the magnets at the end of the spray arms free from metallic ob-
jects?
Mobile units, modules, and inserts must be inspected periodically
together with the machine after 2000operating hours or at least
once per year, see “Maintenance” – “Periodic checks”.