Maintenance measures
78
Cleaning the front
of the machine
The stainless steel front should only be cleaned with a damp cloth
and a cleaning and disinfecting agent or with a non-abrasive stain-
less steel cleaner.
To help prevent resoiling (fingerprints, etc.), a suitable stainless steel
conditioner can be used after cleaning.
Do not use cleaning agents containing ammonia or thinners!
These agents can damage the surface material.
Risk of fire due to ingress of water.
The pressure of a water jet can cause water to get into the ma-
chine.
Never clean the machine or near vicinity with a water hose or a
pressure washer.
Cleaning the
wash cabinet
The wash cabinet is mostly self-cleaning.
However, if you notice a build-up of deposits, please contact Miele
Technical Service for advice.
Cleaning the door
seal
The door seal should be cleaned regularly with a damp cloth to re-
move any soiling.
Seals which are no longer tight or which have suffered damage
must be replaced with new ones by Miele Technical Service.
To Next Page
Loading...
