Miele PLW 8616 - Changing the PIN

System settings
57
Changing the PIN
A user can change their PIN at any time.
The minimum length of the PIN depends on the user level:
- Operator4 digits
- Technician6 digits
- Administrator6 digits
 Press the Change PINbutton.
Entry prompts are given to change the PIN. The buttons next to the
parameters open the on-screen keyboard.
 Enter the old PIN and then the new PIN twice and press OK to con-
firm.
The new PIN is applied in the User managementin the web interface.
It is not visible there. If a user has forgotten their PIN, they can reset it
in the User management.
The PIN for the Administratoruser level can only be reset by Miele
Technical Service.
If the machine is connected to a network, external applications can
access the machine controls, e.g., software for Process documenta-
tionor the Web interface. When the machine is connected for the first
time, Pairingmust be carried out between the machine and the exter-
nal application.
A maximum of 9external applications can be connected to the ma-
chine at the same time. An old connection must be disconnected
before another new pairing request can be confirmed.
 Press the Pairingbutton.
A menu is displayed which lists active connections and open re-
quests with the date and time. Symbols are used to indicate the sta-
tus of a pairing request:
Symbol Function
 Pairing confirmed
 Disconnect pairing
 Pairing requested