Miele PLW 8616 - Containers for Process Chemicals

Dispensing liquid process chemicals
44
4external dispensing systems can be connected instead of the 4op-
tional internal dispensing systems.
If a dispensing system is to dispense different process chemicals,
the chemicals must be changed by Miele Technical Service or an
authorized technician.
Containers for
process chemi-
cals
The drawer for containers with process chemicals is located behind
the service cover. There is enough space in the drawer for 4contain-
ers with a 5l capacity.
Additional containers must be placed outside the machine.
The drawer is equipped with supports. The supports ensure that the
containers are slightly inclined. The containers must sit on the sup-
ports in such a way that the suction wand is located on the lower
side.
Always place the 4containers in the drawer, even if fewer process
chemicals are required. This will prevent the containers from falling
over when the drawer is opened or closed.