Miele W1113 - Fault Display; 070-1 Fault Indication Quick Reference

Technical Information
45
W1113, W1119, W1203, W1213 & W1215 Clothes Washers
1 Technical Data
n/a
2 Function
2.1 Fault Display
The Electronics continuously monitor the status of a program. In
the event of a fault; the electronic stores the information in the form
of a code. Refer to 4.3 Service Mode for details on retrieving and
clearing the fault codes.
In addition to the fault code being stored, certain conditions
immediately alert the user via LEDs on the Fascia Panel.
Refer to Tables 070-1 and 070-2 for detailed information on these
fault indicators.
3 Fault Repair
3.1 Fault Indication - Quick Reference
Condition Noted By User
LED
Digital
Display
Fault
Code
Cause
- - F 0 No fault registered
No indicator(s)
to the user –
stored fault only
- F 1
Temperature sensor (NTC) short-
circuited
No indicator(s)
to the user –
stored fault only
- F 2
Temperature sensor (NTC) open-
circuited
Water inlet
check LED
flashes
- F 10 Insufficient water intake
Drain check
LED flashes
- F 11 Insufficient drainage
Table 070-1: Fault Indication Quick Reference (continued on Table 070-2)