Miele W1113 - Heater Relay - Removal

Technical Information
79
W1113, W1119, W1203, W1213 & W1215 Clothes Washers
4.2 Heater Relay - Removal
1. Ensure the power is disconnected from the appliance.
2. Remove the Lid (010 4.1)
3. Disconnect the plugs from the Heater Relay.
4. Press down the Heater Relay retaining clips, slide the Heater
Relay upwards to remove it from its holder.
4.3 Interference Suppression Filter - Removal
1. Ensure the power is disconnected from the appliance.
2. Remove the Lid (010 4.1)
3. Disconnect the plugs from the Interference Suppression Filter.
4. Remove the retaining screw from the rear panel.