Technical Information
53
W1113, W1119, W1203, W1213 & W1215 Clothes Washers
3.11 Fault Code F41 – Electronic Fault
Symptom
During operation, units with a digital display show 3 dashes. The
Water Intake Valve(s) closes and the program automatically ends
The Drain Pump is activated for 120 seconds.
Cause
Electronic and/or data fault(s).
Remedy
Check / replace the Control and/or Power Electronic – as
necessary.
3.12 Fault Code F43, Control/Power Electronic and the
Control Panel/Display Electronic are Incompatible
Symptom
During operation, units with a digital display show 3 dashes
Cause
The Electronics are incompatible.
Remedy
Verify the correct Control/Power Electronic and the Display
Electronics are installed.
Ensure the appliance is programmed correctly.
3.13 Fault Code F47, Control/Power Module – Control
Panel/Display Module Interface Fault
Cause
Control/Power Electronic to Panel Electronic - communication fault.
Remedy
Check the electrical connection between the two Electronics.
To Next Page
Loading...
