OM-245 849 Page 9
SECTION 4 − INSTALLATION
4-1. Serial Number And Rating Label Location
The serial number and rating information for the power source is located on the rear of the machine. Use the rating labels to determine input power
requirements and/or rated output. For future reference, write serial number in space provided on back cover of this manual.
4-2. Selecting A Location
1 Line Disconnect Device
Locate unit near correct input
power supply.
! Special installation may be
required where gasoline or
volatile liquids are present −
see NEC Article 511 or CEC
Section 20.
Location And Airflow
1
460 mm
(18 in.)
460 mm
(18 in.)
246 381-A
To Next Page
Loading...
