Millipore Milli-Q Integral 3 - Page 151

151
Summary of Alert messages, Continued
Alert messages
(continued)
LCD message What it means
RO REJECTION < SP
• The RO % Rejection is < set
point.
• Contact Millipore.
SERVICE VISIT OVERDUE XX
DAYS
• The Milli-Q System has
determined that a Service Visit is
overdue.
• Contact Millipore.
TAP FEED CONDUCTIVITY > SP
• The Tap Water conductivity is >
set point.
• Contact Millipore.
THE NETWORK CABLE IS
UNPLUGGED
• Check the Ethernet Cable plugged
into the Milli-Q System and the
computer.
• Restart the Milli-Q System.
THIS IP ADDRESS IS ALREADY
USED BY ANOTHER SYSTEM
• Contact your network
administrator.
• Restart the Milli-Q System.