Millipore Milli-Q Integral 3 - Summary of Alarm Messages

133
Summary of Alarm messages
Alarm
messages
LCD message What it means
A10 ERROR 0
• A10 PCB E
2
Prom defective.
• Power off, power on the Milli-Q
System.
• Dispense water for several
minutes.
• If the message continues, then
contact Millipore.
A10 ERROR 1
• A10 PCB A/D converter
defective.
• Power off, power on the Milli-Q
System.
• Dispense water for several
minutes.
• If the message continues, then
contact Millipore.
A10 ERROR 2
• A10 Thermistor defective.
• Power off, power on the Milli-Q
System.
• Dispense water for several
minutes.
• If the message continues, then
contact Millipore.
A10 ERROR 3
• Problem occurred with
temperature compensation.
• Power off, power on the Milli-Q
System.
• Dispense water for several
minutes.
• If the message continues, then
contact Millipore.
A10 ERROR 4
• The water entering the A10 is <
4°C.
• If the problem can not be resolved,
then contact Millipore.
A10 ERROR 5
• The water entering the A10 is >
41°C.
• If the problem can not be resolved,
then contact Millipore.
Continued on next page