86
Printing
Overview
A print out can be obtained from a Milli-Q System.
See the paragraphs below for more information.
Hardware
• A parallel port printer cable is needed. The cable has the following
characteristics:
− 1 end = 25 pin Db-25 male parallel printer port connection, and
− 1 end = 36 pin Centronics male parallel port connection.
• A parallel port printer is needed.
• Contact Millipore for a list of recommended printers.
Printer cable
connection
The printer cable is connected to the Q-POD Base.
Instant Quality
Report
There are 2 types of Instant Quality Reports. These are the:
• Milli-Q Instant Quality Report, and
• the Elix Instant Quality Report.
The Instant Quality Report can be obtained from using the:
• the Main Display, or
• the Q-POD Keypad by pressing in READY Mode.
Q-POD and
E-POD Units
When the print keypad button is pressed on a:
• Q-POD Unit, the Milli-Q Instant Quality Printout is made, and
• E-POD Unit (an accessory), the Elix Instant Quality Printout is made.
Continued on next page
To Next Page
Loading...
