Millipore Milli-Q Integral 3 - Specifications and requirements; Milli-Q Water quality; Weight

25
Specifications and requirements
Milli-Q
®
Water
quality
The water delivered from a Q-POD Unit has the following characteristics.
Parameter Specification Units
Resistivity 18.2
MΩ.cm @25°C
TOC < 5 ppb
Particulates > 0.22 μm**
< 1 Particulates/mL
Bacteria** < 1 cfu/mL
Pyrogens* < 0.001 Eu/mL
RNases* < 0.01 ng/mL
DNases* < 4
pg/μL
Flow Rate** 0.05 – 2 L/min
(*) With BioPak Final Filter
(**) With Millipak or BioPak Final Filter
NOTE:
These specifications are valid for Elix water feed within specification and for
routine operation. Some specifications may not be achieved at start-up.
Weight
The various weights are found in the table below.
Item Operating
Weight
Dry Weight Shipping
Weight
Q-POD Unit 4.7 kg 4.6 kg 7.2 kg
Milli-Q Integral 3 Cabinet 24 kg 18 kg 22 kg
Milli-Q Integral 5 Cabinet 25 kg 19 kg 23 kg
Milli-Q Integral 10 Cabinet 27 kg 20 kg 24 kg
Milli-Q Integral 15 Cabinet 28 kg 21 kg 25 kg
Continued on next page