26
Specifications and requirements, Continued
Electrical
The electrical specifications and data are found in the table below.
Parameter Value
Voltage
100-230 VAC ±10%
Frequency
50-60 Hz ±10%
Main Fuse
• 3.15 Amp Fast Acting; 5 mm x 20 mm; 250 V
safety voltage.
• The fuse should be serviced by a qualified
Millipore Service Representative.
Power Used 160 VA
Power Cord Length 2.5 metres
Electrical Ground Earth Grounded
Power Cord use
• The Milli-Q System is powered on and off by
removing the power cord from the wall outlet.
• The power cord should be plugged into a wall
outlet that is accessible.
Continued on next page
To Next Page
Loading...
