Millipore Milli-Q Integral 3 - Installing a POD Pak

51
Installing a POD Pak
Overview
The installation of a POD Pak involves 2 steps. These are:
• placing and flushing the POD Pak onto the Q-POD Unit, and
• registering the installation of a specific POD Pak.
Placing and
flushing
Follow the instructions delivered with the POD Pak.
Registering
Follow the steps below to register the installation of the POD Pak.
Step Action Diagram
1 Start in STANDBY Mode.
2
• Select <Menu>.
• Press .
3
• Select <Maintenance>.
• Press
.
Continued on next page